Lighting manufacturer: Several factors must be considered in the lighting application of ceramic exhibition halls

Lighting manufacturers must consider several factors in the application of ceramic exhibition hall lighting
1. Ensure scientific and reasonable lighting uniformity
Lighting manufacturers have stated that ceramic displays, whether in sheet form or in sample rooms, have very high regulations for the uniformity of light. Large scale uniform light is beneficial for fully showcasing the color patterns of ceramic products. However, narrow beam condenser illumination has a small coverage range of light sources, which cannot effectively display the color and pattern design of ceramics, and is prone to color tone errors in different areas of the same product. Non directional floodlighting, where the light source is too scattered to illuminate the entire room, cannot effectively showcase ceramic equipment, and is not an ideal low-carbon, environmentally friendly, and efficient lighting method.
At the same time as meeting the market demand for uniformity of ceramic product lighting, it is also necessary to build the atmosphere of the exhibition hall, scientifically design the shadow scheme, and improve the display atmosphere. Therefore, selecting directional lighting fixtures with an angle of 40 ° in the ceramic exhibition hall is the best choice.
2. Efficient control and prevention of glare
Lighting manufacturers have stated that ceramic exhibits have strong reflective effects, especially for products such as glazed tiles and glazed tiles. According to the total reflection and weak diffuse reflection of new ceramic products, how to control glare is a major challenge in the lighting application of ceramic exhibition halls. Therefore, in the application of lighting, we need to start from the following aspects:
(1) Projection perspective: When selecting lighting fixtures, on the one hand, choose regular lighting fixtures with a certain protective angle to minimize direct glare and reflection glare caused by irritation and discomfort to the eyes. On the other hand, use a light source with a larger luminous angle, and the direction angle of the illumination vector direction is within the range of 30 to 120 degrees.
(2) Installation method: The lighting installation position should be 40-60cm away from the wall, which is beneficial for effective management of lighting effect projection angle.
(3) Lighting fixture structure: In order to efficiently control and prevent glare, under the premise of determining the installation method of projection angle, people can also choose to apply lighting products hidden in the lamp source or with anti reflective devices to reduce the formation of glare.
3. Ensure appropriate direct relative height
The lighting manufacturer stated that based on the average height of Chinese people and the relative height of the golden visual effect, the relative height of the lighting effect projection in the environment displaying wall tiles is 150CM to 160CM. Naturally, sometimes the projection angle of light is determined by the displayed ceramic products, such as key displays such as mosaic and glazed bricks, and the lighting effect should be immediately projected onto the road surface.
4. Select high color rendering index
The color rendering index is a key lighting indicator value that indicates the true color tone of ceramic products. In the ceramic exhibition hall, it is stipulated that the light source color rendering index of the displayed products must be excellent, and the color rendering performance must not be lower than 80
5. Reasonably configure appropriate contrast
Appropriate contrast can create a comfortable and comfortable lighting atmosphere, warm contrast can create a warm atmosphere, and can also create a hot atmosphere. Cold color adjustment can create a cool atmosphere, and can also create a cold atmosphere. Therefore, in different environments and types of indoor decoration styles, we should choose the contrast that is suitable for ourselves.